Air quality in Bautzen, Saxony, Germany today

Update date
Last updated: 2026-02-10T17:00:00+00:00
[Advertisement 1]

Mr. Duck’s Air Quality Score

Mr. Duck – Moderate air today

Moderate air today for Bautzen, Saxony, Germany

⚠️ This website is currently under active development. Some data may be incomplete or temporarily inaccurate. For health-critical decisions, please verify information through official government or environmental sources.
Categories follow US EPA AQI breakpoints for PM (estimate from latest valid measurements; this project does not compute EPA NowCast/24-hour AQI yet).

This friendly indicator summarizes the latest city readings. For health guidance, please see: EPA AirNow or WHO.

Air quality today

The air quality in Bautzen today is classified as Moderate. The main pollutant identified is PM2.5 (fine particles). Measurements show a PM2.5 value of 9.093 µg/m³ and a PM10 value of 13.555 µg/m³, based on four valid observations.

Data is shown via OpenAQ. This page is informational; for health guidance, use official sources such as EPA AirNow or WHO.

Latest sensor values

PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).

Moderate
PM25
9.09
µg/m³
Good
PM10
13.6
µg/m³
Measured
O3
52.6
µg/m³
Measured
NO2
13.5
µg/m³
[Advertisement 2]

What the data includes

The air‑quality record for Bautzen currently draws on five individual measurement rows, one for each of the pollutants tracked in this city: nitrogen monoxide (NO), nitrogen dioxide (NO₂), ozone (O₃), particulate matter 10 µm or less (PM10) and particulate matter 2.5 µm or less (PM2.5). All values are reported in micrograms per cubic metre (µg/m³).

The dataset shows a mixed picture of freshness. The NO reading is the oldest entry, last updated on 2024‑03‑11 11:00 UTC, while the remaining four pollutants were all refreshed very recently, each with a timestamp of 2026‑02‑10 17:00 UTC – well within the three‑day window that OpenAQ flags as current. Because there is only one row per pollutant, the reported minimum, median and maximum are identical for each substance, indicating no observed variability in this snapshot.

In practical terms, Bautzen’s air‑quality profile is based on a single monitoring location per pollutant, so spatial differences across the city are not captured here. The data set therefore provides a concise but limited view: NO stands at 7.513 µg/m³, NO₂ at 13.537 µg/m³, O₃ at 52.616 µg/m³, PM10 at 13.555 µg/m³ and PM2.5 at 9.093 µg/m³. While the recent timestamps suggest that most of the information is up‑to‑date, the lone older NO measurement highlights a small gap in coverage. Users should keep in mind that conditions can vary by neighbourhood and over time, and the current figures represent only the moments captured by these five rows.

Learn more about sources and filtering: About the data.

Trusted references: WHO (Air pollution) · US EPA AirNow · European Environment Agency (Air)

Latest sensor values (bars)

PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).

PM25 9.09 µg/m³ PM10 13.6 µg/m³ O3 52.6 µg/m³ NO2 13.5 µg/m³
[Advertisement 3]

Data notes

The data shown for Bautzen reflects four valid measurements and was updated within three days, with the latest refresh recorded at 2026‑02‑10 17:00 UTC. This snapshot provides a current view of citywide air quality but note that conditions can differ across neighborhoods and change throughout the day, so individual experiences may vary from the reported values.

OpenAQ station rows

StationParameterValueUnitLast updated
Bautzenno7.513µg/m³2024-03-11 11:00 UTC
Bautzenno213.537µg/m³2026-02-10 17:00 UTC
Bautzeno352.616µg/m³2026-02-10 17:00 UTC
Bautzenpm1013.555µg/m³2026-02-10 17:00 UTC
Bautzenpm259.093µg/m³2026-02-10 17:00 UTC