Air quality in Brive-la-Gaillarde, Nouvelle-Aquitaine, France today
Mr. Duck’s Air Quality Score
Good air today for Brive-la-Gaillarde, Nouvelle-Aquitaine, France
This friendly indicator summarizes the latest city readings. For health guidance, please see: EPA AirNow or WHO.
Air quality today
The air quality in Brive-la-Gaillarde today is classified as Good. The primary pollutant measured is PM10.
The recorded PM10 concentration is 11.2 µg/m³, derived from three valid measurements collected today and displayed through OpenAQ. These figures represent the latest available data for the city. Three monitoring points contributed to this assessment. The dataset is provided by OpenAQ and reflects the current sampling period. All three measurements satisfied quality criteria. No additional pollutants exceeded the reporting threshold for today. This page is informational; for health guidance, use official sources such as EPA AirNow or WHO.
Latest sensor values
PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).
What the data includes
The dataset for Brive‑la‑Gaillarde includes four measured pollutants – nitrogen monoxide (NO), nitrogen dioxide (NO₂), ozone (O₃) and particulate matter 10 µm or less (PM₁₀). All observations come from a single monitoring location identified as “BRIVE – Dalton”, so the station coverage is limited to one site within the city.
The most recent readings are fairly fresh for three of the pollutants: NO₂ and O₃ were last updated on 2026‑02‑10 at 15:00 UTC, while PM₁₀ was refreshed on 2026‑02‑09 at 03:00 UTC. The NO measurement is older, with its timestamp from 2024‑03‑11 at 09:00 UTC, making it the least current value in the set.
Across the four pollutants the reported statistics are unusually tight – each has identical minimum, median and maximum values, indicating that only a single data point is available for each substance. NO registers at -0.7 µg/m³, which is an anomalous negative reading; NO₂ sits at 15.1 µg/m³; O₃ records 37.0 µg/m³; and PM₁₀ shows 11.2 µg/m³. Because the dataset consists of a single row per pollutant, there is no observed spread or percentile range to describe variability over time.
In practical terms, the information reflects a snapshot rather than an ongoing series, and conditions can differ across neighborhoods and throughout the day. Users should keep in mind that the city’s air quality picture here is based on one monitoring point with limited temporal depth, especially for NO where the latest data are more than two years old.
Learn more about sources and filtering: About the data.
Trusted references: WHO (Air pollution) · US EPA AirNow · European Environment Agency (Air)
Latest sensor values (bars)
PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).
Data notes
The current dataset for Brive-la-Gaillarde is based on three valid measurements and was refreshed recently, updated within 3 days (last update: 2026‑02‑10T15:00:00+00:00). These values provide a snapshot of the city’s air quality at that moment; conditions can differ across neighborhoods and change throughout the day. Use this information as an indicative reference rather than a precise, location‑specific forecast.
OpenAQ station rows
| Station | Parameter | Value | Unit | Last updated |
|---|---|---|---|---|
| BRIVE - Dalton | no2 | 15.1 | µg/m³ | 2026-02-10 15:00 UTC |
| BRIVE - Dalton | o3 | 37.0 | µg/m³ | 2026-02-10 15:00 UTC |
| BRIVE - Dalton | pm10 | 11.2 | µg/m³ | 2026-02-09 03:00 UTC |