Air quality in Brixlegg, Tyrol, Austria today
Mr. Duck’s Air Quality Score
Good air today for Brixlegg, Tyrol, Austria
This friendly indicator summarizes the latest city readings. For health guidance, please see: EPA AirNow or WHO.
Air quality today
The air quality today in Brixlegg is classified as Good. The main pollutant measured is PM2.5. Data are shown via OpenAQ, which aggregates measurements from local monitoring stations. A total of three valid measurements were used to calculate the reported concentrations. The PM2.5 concentration is 5.1905 µg/m³ and the PM10 concentration is 8.814 µg/m³. The reference values for PM2.5 and PM10 are 5.1905 µg/m³ and 8.814 µg/m³ respectively, and the current measurements match these reference levels. No additional pollutants exceeded reporting thresholds in the available data. These values are consistent with the Good air‑quality category.
This page is informational; for health guidance, use official sources such as EPA AirNow or WHO.
Latest sensor values
PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).
What the data includes
The Brixlegg air‑quality feed contains three measured pollutants – particulate matter 10 µm (PM10), particulate matter 2.5 µm (PM2.5) and sulfur dioxide (SO₂). In total the dataset holds five rows of observations, with two rows for PM10, two rows for SO₂ and a single row for PM2.5. All values come from the Brixlegg Innweg monitoring site and the most recent timestamps are 2026‑02‑10 20:00 UTC, which the source flags as updated within the last three days. Three of the five rows are fresh (less than three days old) while two are classified as older, indicating that the record is a mix of recent and slightly dated points.
PM10 values range from a low of 8.814 µg/m³ to a high of 19.0 µg/m³, with a median of 13.907 µg/m³ and the 10th‑percentile around 9.83 µg/m³ and the 90th‑percentile near 17.98 µg/m³, showing a moderate spread around the centre. SO₂ measurements span from 0.7935 µg/m³ up to 2.0 µg/m³, median 1.3967 µg/m³, with the 10th‑percentile at about 0.914 µg/m³ and the 90th‑percentile close to 1.879 µg/m³, indicating a tighter distribution. PM2.5 is represented by a single reading of 5.1905 µg/m³, so no range or variability can be derived for that pollutant. The uneven number of rows across pollutants means that while PM10 and SO₂ have a modest set of recent observations, the picture for PM2.5 is limited to one point, and the presence of older rows suggests that conditions can differ by location and time within Brixlegg.
Learn more about sources and filtering: About the data.
Trusted references: WHO (Air pollution) · US EPA AirNow · European Environment Agency (Air)
Latest sensor values (bars)
PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).
Data notes
The dataset for Brixlegg includes three valid measurements and is updated within 3 days, with the latest update recorded on 2026-02-10T20:00:00+00:00. These values represent the most recent monitoring period available. Please note that air quality can vary by location and time within the city, so this snapshot may not reflect conditions at all sites or moments.
OpenAQ station rows
| Station | Parameter | Value | Unit | Last updated |
|---|---|---|---|---|
| Brixlegg Innweg | pm10 | 19.0 | µg/m³ | 2016-12-12 09:00 UTC |
| Brixlegg Innweg | so2 | 2.0 | µg/m³ | 2016-12-12 09:00 UTC |
| Brixlegg Innweg | pm10 | 8.814 | µg/m³ | 2026-02-10 20:00 UTC |
| Brixlegg Innweg | pm25 | 5.1905 | µg/m³ | 2026-02-10 20:00 UTC |
| Brixlegg Innweg | so2 | 0.793499 | µg/m³ | 2026-02-10 20:00 UTC |