Air quality in Cranbrook, British Columbia, Canada today

Update date
Last updated: 2026-02-10T22:00:00+00:00
[Advertisement 1]

Mr. Duck’s Air Quality Score

Mr. Duck – Good air today

Good air today for Cranbrook, British Columbia, Canada

⚠️ This website is currently under active development. Some data may be incomplete or temporarily inaccurate. For health-critical decisions, please verify information through official government or environmental sources.
Categories follow US EPA AQI breakpoints for PM (estimate from latest valid measurements; this project does not compute EPA NowCast/24-hour AQI yet).

This friendly indicator summarizes the latest city readings. For health guidance, please see: EPA AirNow or WHO.

Air quality today

The air quality in Cranbrook today is classified as Good. The primary pollutant measured is PM2.5 (fine particles).

Four valid measurements were recorded, showing a PM2.5 reference value of 0.9 µg/m³. No PM10 data are available for this assessment. This page is informational; for health guidance, use official sources such as EPA AirNow or WHO.

Latest sensor values

PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).

Good
PM25
0.9
µg/m³
Measured
O3
0.039
ppm
Measured
NO2
0.0008
ppm
[Advertisement 2]

What the data includes

The air‑quality record for Cranbrook draws on a single monitoring site – the Muriel Bax station – which supplies four pollutant measurements. The dataset therefore consists of one row per pollutant, giving a total of four observations across the city. All four values were last refreshed on 2026‑02‑10 at 22:00 UTC, so the information is current within the past three days for each contaminant.

The available pollutants are nitrogen monoxide (NO) at 0.0001 ppm, nitrogen dioxide (NO₂) at 0.0008 ppm, ozone (O₃) at 0.039 ppm and fine particulate matter (PM2.5) at 0.9 µg/m³. For each of these, the minimum, median and maximum recorded values are identical, indicating that only a single measurement exists for the reporting period. Consequently there is no observed spread or variability in the data; the reported figure represents both the typical and extreme reading for the latest update.

Because the dataset contains just one station, spatial coverage across Cranbrook is limited to the location of the Muriel Bax monitor. While the timestamps are recent, the lack of multiple sites means that conditions elsewhere in the city may differ from what is captured here. Users should keep in mind that these four figures provide a snapshot rather than a comprehensive picture of air quality throughout the entire community.

Learn more about sources and filtering: About the data.

Trusted references: WHO (Air pollution) · US EPA AirNow · European Environment Agency (Air)

Latest sensor values (bars)

PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).

PM25 0.9 µg/m³ O3 0.039 ppm NO2 0.0008 ppm
[Advertisement 3]

Data notes

The data shown reflects four valid measurements and was updated within three days, with the most recent reading recorded on 2026‑02‑10 at 22:00 UTC. This snapshot provides a current view of air quality across Cranbrook, but conditions can differ by specific neighbourhoods and times of day, so local variations may exist.

OpenAQ station rows

StationParameterValueUnitLast updated
Cranbrook Muriel Baxno0.0001ppm2026-02-10 22:00 UTC
Cranbrook Muriel Baxno20.0008ppm2026-02-10 22:00 UTC
Cranbrook Muriel Baxo30.039ppm2026-02-10 22:00 UTC
Cranbrook Muriel Baxpm250.9µg/m³2026-02-10 22:00 UTC