Air quality in District of Belconnen, Australia today
Mr. Duck’s Air Quality Score
Good air today for District of Belconnen, Australia
This friendly indicator summarizes the latest city readings. For health guidance, please see: EPA AirNow or WHO.
Air quality today
The air quality today in the District of Belconnen is classified as Good. The primary pollutant measured is PM2.5. The PM2.5 concentration is 8.11 µg/m³ and the PM10 concentration is 7.02 µg/m³. These concentrations are expressed in micrograms per cubic metre and align with the Good classification. The assessment is based on five valid measurements collected for the latest reporting period. Data is shown via OpenAQ.
No other pollutant exceeds the reported levels for this interval, and the PM values serve as the reference points for the current rating. The five observations provide a complete set for the latest snapshot of ambient particulate matter in the area. This page is informational; for health guidance, use official sources such as EPA AirNow or WHO.
Latest sensor values
PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).
What the data includes
The dataset for the District of Belconnen contains measurements for five pollutants – carbon monoxide (CO), nitrogen dioxide (NO₂), ozone (O₃), particulate matter ≤ 10 µm (PM10) and particulate matter ≤ 2.5 µm (PM2.5) – all supplied through the OpenAQ platform. Each pollutant is recorded in its standard unit (CO, NO₂ and O₃ in parts per million; PM10 and PM2.5 in micrograms per cubic metre) and originates from a single monitoring station located at Florey. Consequently, the data reflects one spatial point rather than a network of sites across the district.
All five readings share the same most‑recent timestamp of 2026‑02‑10 21:00 UTC, which falls within the “updated within 3 days” freshness category. The values are CO 0.27 ppm, NO₂ 0.004 ppm, O₃ 0.018 ppm, PM10 7.02 µg/m³ and PM2.5 8.11 µg/m³. For each pollutant the minimum, median, maximum and the 10th and 90th percentiles are identical, indicating that the dataset captures a single observation rather than a range of measurements.
Because the coverage consists of only one station, the data does not capture variations that may exist elsewhere in Belconnen, and the lack of multiple timestamps means trends or short‑term fluctuations cannot be assessed from this snapshot. Nonetheless, the uniform recency of the records ensures that the figures represent the most current conditions measured at the Florey location.
Learn more about sources and filtering: About the data.
Trusted references: WHO (Air pollution) · US EPA AirNow · European Environment Agency (Air)
Latest sensor values (bars)
PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).
Data notes
The dataset for the District of Belconnen includes five valid measurements and is updated within 3 days. The latest data were recorded on 2026-02-10 at 21:00 UTC. This snapshot reflects conditions at the time of sampling; air quality can vary by location and time within the city, so individual experiences may differ from the reported values.
OpenAQ station rows
| Station | Parameter | Value | Unit | Last updated |
|---|---|---|---|---|
| Florey | co | 0.27 | ppm | 2026-02-10 21:00 UTC |
| Florey | no2 | 0.004 | ppm | 2026-02-10 21:00 UTC |
| Florey | o3 | 0.018 | ppm | 2026-02-10 21:00 UTC |
| Florey | pm10 | 7.02 | µg/m³ | 2026-02-10 21:00 UTC |
| Florey | pm25 | 8.11 | µg/m³ | 2026-02-10 21:00 UTC |