Air quality in Fingal, Ireland today

Update date
Last updated: 2026-02-10T20:00:00+00:00
[Advertisement 1]

Mr. Duck’s Air Quality Score

Mr. Duck – Good air today

Good air today for Fingal, Ireland

⚠️ This website is currently under active development. Some data may be incomplete or temporarily inaccurate. For health-critical decisions, please verify information through official government or environmental sources.
Categories follow US EPA AQI breakpoints for PM (estimate from latest valid measurements; this project does not compute EPA NowCast/24-hour AQI yet).

This friendly indicator summarizes the latest city readings. For health guidance, please see: EPA AirNow or WHO.

Air quality today

The air quality in Fingal is currently classified as Good. According to the latest assessment, the main pollutant identified is PM2.5. The reference value for PM2.5 stands at 1.80 µg/m³, while the reference value for PM10 is 4.36 µg/m³. These figures are derived from 11 valid measurements collected for the current reporting period.

Data is shown via OpenAQ, which aggregates observations from participating monitoring stations. The reported concentrations place Fingal within the Good category, indicating that the measured pollutant levels are below thresholds associated with higher classifications. This concise summary reflects the current state based on the available data set. This page is informational; for health guidance, use official sources such as EPA AirNow or WHO.

Latest sensor values

PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).

Good
PM25
1.8
µg/m³
Good
PM10
4.36
µg/m³
Info
PM1
0.336
µg/m³
Measured
O3
48.9
µg/m³
Measured
NO2
17.3
µg/m³
[Advertisement 2]

What the data includes

The Fingal data set pulls OpenAQ readings from four monitoring sites and contains sixteen individual rows of observations. Sixteen rows are split across the pollutants measured in the city: carbon monoxide (CO), nitrogen dioxide (NO₂), ozone (O₃), particulate matter of 1 µm (PM1), 2.5 µm (PM2.5) and 10 µm (PM10), relative humidity, temperature and the particle count metric UM003. For most pollutants there are several recent entries – eleven of the rows were recorded within the last thirty days, with the newest timestamps on 2026‑02‑10 (20:00 UTC for PM2.5, PM1, relative humidity, temperature and UM003, and 13:00 UTC for NO₂ and PM10). Five rows are older, the oldest being the CO measurement from 2025‑11‑28 (18:00 UTC). Ozone is listed among the monitored species but no recent values appear in the current collection.

Across the available data the measured concentrations show a broad spread. PM2.5 values range from 1.6 µg/m³ up to 9.71 µg/m³ with a median of about 2.31 µg/m³, while NO₂ varies from 2.11 µg/m³ to 52.96 µg/m³ and has a median near 17.3 µg/m³. PM10 spans 2.97 µg/m³ to 20.27 µg/m³ with a median of 4.36 µg/m³. In contrast, PM1, relative humidity, temperature and UM003 each have a single recent reading – 0.336 µg/m³, 66.81 %, 12.48 °C and 224.57 particles/cm³ respectively – and CO is represented by a single older value of 930 µg/m³. This pattern indicates that the dataset is richer for the larger particulate fractions and NO₂, while the finer particles, humidity, temperature and CO are captured at only one site each, limiting spatial detail for those variables.

Overall the Fingal air‑quality snapshot provides recent, multi‑site coverage for several key pollutants, but the uneven number of observations and the older CO record mean that conditions can differ across the city and over time, especially for the less‑frequently sampled parameters.

Learn more about sources and filtering: About the data.

Trusted references: WHO (Air pollution) · US EPA AirNow · European Environment Agency (Air)

Latest sensor values (bars)

PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).

PM25 1.8 µg/m³ PM10 4.36 µg/m³ PM1 0.336 µg/m³ O3 48.9 µg/m³ NO2 17.3 µg/m³
[Advertisement 3]

Data notes

These data are based on 11 valid measurements and have been updated within 30 days, with the most recent reading recorded on 2026-02-10 at 20:00 UTC. The figures represent a city‑wide average at the time of collection. Please note that air quality can vary by location and time within Fingal, so conditions may differ from the snapshot shown.

OpenAQ station rows

StationParameterValueUnitLast updated
Dublin Blanchardstown River Roadno252.96µg/m³2025-10-14 11:00 UTC
Dublin Blanchardstown River Roadpm1020.27µg/m³2025-10-14 11:00 UTC
Dublin Blanchardstown River Roadpm259.71µg/m³2025-10-14 11:00 UTC
Dublin Airport 1pm10.3360416689266761µg/m³2026-02-10 20:00 UTC
Dublin Airport 1pm251.799000001574556µg/m³2026-02-10 20:00 UTC
Dublin Airport 1relativehumidity66.81012538274129%2026-02-10 20:00 UTC
Dublin Airport 1temperature12.4777499516805c2026-02-10 20:00 UTC
Dublin Airport 1um003224.5737501780192particles/cm³2026-02-10 20:00 UTC
Dublin Dublin Airportno22.11µg/m³2025-11-26 11:00 UTC
Dublin Dublin Airportpm102.97µg/m³2026-01-28 06:00 UTC
Dublin Dublin Airportpm251.6µg/m³2026-01-28 06:00 UTC
Dublin Swords Watery Laneno217.32µg/m³2026-02-10 13:00 UTC
Dublin Swords Watery Laneo348.9µg/m³2026-02-10 13:00 UTC
Dublin Swords Watery Lanepm104.36µg/m³2026-02-10 13:00 UTC
Dublin Swords Watery Lanepm252.83µg/m³2026-02-10 13:00 UTC