Air quality in Kamloops, British Columbia, Canada today

Update date
Last updated: 2026-02-10T22:00:00+00:00
[Advertisement 1]

Mr. Duck’s Air Quality Score

Mr. Duck – Moderate air today

Moderate air today for Kamloops, British Columbia, Canada

⚠️ This website is currently under active development. Some data may be incomplete or temporarily inaccurate. For health-critical decisions, please verify information through official government or environmental sources.
Categories follow US EPA AQI breakpoints for PM (estimate from latest valid measurements; this project does not compute EPA NowCast/24-hour AQI yet).

This friendly indicator summarizes the latest city readings. For health guidance, please see: EPA AirNow or WHO.

Air quality today

The air quality in Kamloops today is classified as Moderate. The primary pollutant identified is PM2.5 (fine particles).

Measurements show a PM2.5 concentration of 22.7 µg/m³, based on five valid observations reported through OpenAQ. No PM10 value is available for this assessment. This page is informational; for health guidance, use official sources such as EPA AirNow or WHO.

Latest sensor values

PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).

Moderate
PM25
22.7
µg/m³
Measured
O3
0.011
ppm
Measured
NO2
0.0163
ppm
Measured
SO2
0.0015
ppm
[Advertisement 2]

What the data includes

The Kamloops air‑quality dataset currently includes five measured pollutants – nitrogen monoxide (NO), nitrogen dioxide (NO₂), ozone (O₃), fine particulate matter (PM₂.5) and sulfur dioxide (SO₂). All values come from a single monitoring location, identified as the Kamloops Federal Building, so the city’s overall coverage is limited to one station row for each pollutant. The most recent data timestamp across the board is 2026‑02‑10 22:00 UTC, which falls within the “updated within three days” freshness category, indicating that the latest readings are fairly current.

Because only one observation exists for each contaminant, the statistical spread is essentially zero: the minimum, median and maximum values are identical. NO registers at 0.0092 ppm, NO₂ at 0.0163 ppm, O₃ at 0.011 ppm, PM₂.5 at 22.7 µg/m³ and SO₂ at 0.0015 ppm, each recorded at the same moment. This uniformity means there is no range to describe variability over time or across different parts of the city from this dataset.

The single‑station coverage and lack of multiple timestamps limit the ability to capture spatial or temporal fluctuations in air quality for Kamloops. While the data are up‑to‑date, they represent only one point source; conditions elsewhere in the city may differ. Users should keep in mind that broader monitoring networks would be needed to provide a more comprehensive picture of ambient pollutant levels across Kamloops.

Learn more about sources and filtering: About the data.

Trusted references: WHO (Air pollution) · US EPA AirNow · European Environment Agency (Air)

Latest sensor values (bars)

PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).

PM25 22.7 µg/m³ O3 0.011 ppm NO2 0.0163 ppm SO2 0.0015 ppm
[Advertisement 3]

Data notes

The current dataset for Kamloops includes five valid measurements and was refreshed recently, with the latest update recorded on 2026‑02‑10 at 22:00 UTC; it is therefore considered Updated within 3 days. These values represent a snapshot of ambient conditions across the monitoring network, but air quality can differ by specific location and time of day within the city, so individual experiences may vary.

OpenAQ station rows

StationParameterValueUnitLast updated
Kamloops Federal Buino0.0092ppm2026-02-10 22:00 UTC
Kamloops Federal Buino20.016300000000000002ppm2026-02-10 22:00 UTC
Kamloops Federal Buio30.011ppm2026-02-10 22:00 UTC
Kamloops Federal Buipm2522.7µg/m³2026-02-10 22:00 UTC
Kamloops Federal Buiso20.0015ppm2026-02-10 22:00 UTC