Air quality in Le Puy-en-Velay, Auvergne-Rhône-Alpes, France today

Update date
Last updated: 2026-02-10T15:00:00+00:00
[Advertisement 1]

Mr. Duck’s Air Quality Score

Mr. Duck – Good air today

Good air today for Le Puy-en-Velay, Auvergne-Rhône-Alpes, France

⚠️ This website is currently under active development. Some data may be incomplete or temporarily inaccurate. For health-critical decisions, please verify information through official government or environmental sources.
Categories follow US EPA AQI breakpoints for PM (estimate from latest valid measurements; this project does not compute EPA NowCast/24-hour AQI yet).

This friendly indicator summarizes the latest city readings. For health guidance, please see: EPA AirNow or WHO.

Air quality today

The air quality in Le Puy‑en‑Velay is classified as Good today. The primary pollutant recorded is PM10, with a measured concentration of 6.7 µg/m³ based on three valid observations reported through OpenAQ.

This page is informational; for health guidance, use official sources such as EPA AirNow or WHO.

Latest sensor values

PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).

Good
PM10
6.7
µg/m³
Measured
O3
70.1
µg/m³
Measured
NO2
2.1
µg/m³
[Advertisement 2]

What the data includes

The dataset for Le Puy‑en‑Velay contains measurements for four common air pollutants: nitrogen monoxide (NO), nitrogen dioxide (NO₂), ozone (O₃) and particulate matter up to 10 µm (PM₁₀). All values come from a single monitoring site, Le Puy‑Causans, so the city’s overall coverage is limited to one location. The most recent records show that NO₂ and O₃ were last updated on 2026‑02‑10 at 15:00 UTC, while PM₁₀ was refreshed on 2026‑02‑09 at 03:00 UTC. The NO reading is older, dated 2024‑03‑11 at 09:00 UTC, making it the least current datum in the set.

Each pollutant has only one reported figure, so there is no observed range or variability within the data. For NO the value is 1.6 µg/m³; for NO₂ it is 2.1 µg/m³; O₃ registers at 70.1 µg/m³; and PM₁₀ measures 6.7 µg/m³. Because the minimum, median and maximum are identical for every pollutant, the dataset reflects a single snapshot rather than a distribution of measurements over time.

Overall, the data are fairly fresh for three of the four pollutants, with updates within the past few days, but the older NO entry highlights that not all parameters are refreshed equally. With only one monitoring station contributing, conditions in other parts of Le Puy‑en‑Velay may differ from these point measurements, and the limited temporal depth means trends cannot be inferred from this snapshot alone.

Learn more about sources and filtering: About the data.

Trusted references: WHO (Air pollution) · US EPA AirNow · European Environment Agency (Air)

Latest sensor values (bars)

PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).

PM10 6.7 µg/m³ O3 70.1 µg/m³ NO2 2.1 µg/m³
[Advertisement 3]

Data notes

The data shown for Le Puy‑en‑Velay is based on three valid measurements and was refreshed recently, with the latest update recorded at 2026‑02‑10T15:00:00+00:00 (updated within three days). This snapshot reflects conditions at the time of sampling; air quality can vary across different neighbourhoods and moments throughout the city.

OpenAQ station rows

StationParameterValueUnitLast updated
Le Puy-Causansno1.6µg/m³2024-03-11 09:00 UTC
Le Puy-Causansno22.1µg/m³2026-02-10 15:00 UTC
Le Puy-Causanso370.1µg/m³2026-02-10 15:00 UTC
Le Puy-Causanspm106.7µg/m³2026-02-09 03:00 UTC