Air quality in Morbegno, Lombardy, Italy today
Mr. Duck’s Air Quality Score
Good air today for Morbegno, Lombardy, Italy
This friendly indicator summarizes the latest city readings. For health guidance, please see: EPA AirNow or WHO.
Air quality today
The air quality in Morbegno today is classified as Good. The primary pollutant identified is PM10, with a reference concentration of 16.0 micrograms per cubic metre. This measurement reflects the level of coarse particulate matter present in the ambient atmosphere.
Three valid observations were used to generate the current assessment and the data are presented through OpenAQ. The reported PM10 value corresponds to the stated reference figure, indicating that concentrations are within the range associated with the Good category. No other pollutants are highlighted as dominant for this period. Data are refreshed periodically and reflect recent sampling. This page is informational; for health guidance, use official sources such as EPA AirNow or WHO.
Latest sensor values
PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).
What the data includes
The Morbegno air‑quality record draws from four monitoring rows, each providing a single pollutant reading. The dataset includes carbon monoxide (CO), nitrogen dioxide (NO2), ozone (O3) and particulate matter ≤ 10 µm (PM10). Overall the station coverage is limited to one row per pollutant, so spatial representation across the city is narrow.
Freshness varies markedly between the pollutants. The CO measurement is dated 2022‑03‑14 13:00 UTC, which the system flags as “old data.” In contrast, the NO2, O3 and PM10 values were all recorded on 2026‑02‑08 19:00 UTC and are classified as updated within the last seven days. This means that for three of the four pollutants the most recent snapshot is less than a day old, while CO reflects conditions from more than three years ago.
All four readings are single‑point values with no observed spread: CO registers exactly 538.902 µg/m³, NO2 5.204888 µg/m³, O3 33.1359444 µg/m³ and PM10 16.0 µg/m³. Because each pollutant has only one recorded value, the dataset cannot show a range or variability over time; the median, minimum and maximum are identical for every parameter.
Consequently, while the latest data for NO2, O3 and PM10 give a current glimpse of air quality in Morbegno, the overall picture is constrained by the single‑station layout and the outdated CO entry. Users should keep in mind that conditions can differ across neighborhoods and moments, and the limited number of rows does not capture those variations.
Learn more about sources and filtering: About the data.
Trusted references: WHO (Air pollution) · US EPA AirNow · European Environment Agency (Air)
Latest sensor values (bars)
PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).
Data notes
The current dataset for Morbegno includes three valid measurements and was updated within 3 days, with the latest reading recorded at 2026‑02‑08T19:00:00+00:00. These figures represent a recent snapshot of ambient conditions, but air quality can differ across neighborhoods and change throughout the day, so local variations may not be captured by this summary.
OpenAQ station rows
| Station | Parameter | Value | Unit | Last updated |
|---|---|---|---|---|
| MORBEGNO | no2 | 5.204888 | µg/m³ | 2026-02-08 19:00 UTC |
| MORBEGNO | o3 | 33.1359444 | µg/m³ | 2026-02-08 19:00 UTC |
| MORBEGNO | pm10 | 16.0 | µg/m³ | 2026-02-08 19:00 UTC |