Air quality in Puli Township, Taiwan today

Update date
Last updated: 2026-02-10T23:00:00+00:00
[Advertisement 1]

Mr. Duck’s Air Quality Score

Mr. Duck – Moderate air today

Moderate air today for Puli Township, Taiwan

⚠️ This website is currently under active development. Some data may be incomplete or temporarily inaccurate. For health-critical decisions, please verify information through official government or environmental sources.
Categories follow US EPA AQI breakpoints for PM (estimate from latest valid measurements; this project does not compute EPA NowCast/24-hour AQI yet).

This friendly indicator summarizes the latest city readings. For health guidance, please see: EPA AirNow or WHO.

Air quality today

The air quality in Puli Township is currently classified as Moderate. The primary pollutant identified is PM2.5 (fine particles). Measurements show a PM2.5 concentration of 25.0 µg/m³ and a PM10 level of 24.0 µg/m³, based on six valid observations recorded by OpenAQ.

These values reflect the present conditions without implying any trend or cause. This page is informational; for health guidance, use official sources such as EPA AirNow or WHO.

Latest sensor values

PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).

Moderate
PM25
25
µg/m³
Good
PM10
24
µg/m³
Measured
O3
0.008
ppm
Measured
NO2
0.008
ppm
Measured
SO2
0.0016
ppm
Measured
CO
0.32
ppm
[Advertisement 2]

What the data includes

The air‑quality dataset for Puli Township contains a single monitoring station that reports six common pollutants: carbon monoxide (CO), nitrogen dioxide (NO₂), ozone (O₃), particulate matter ≤ 10 µm (PM10), particulate matter ≤ 2.5 µm (PM2.5) and sulfur dioxide (SO₂). All of the latest readings were recorded at the same moment, 2026‑02‑10 23:00 UTC, so the data are uniformly fresh across every pollutant.

For each contaminant the reported value is identical to its minimum, median and maximum, indicating that only one measurement exists for the period covered. CO registers 0.32 ppm, NO₂ and O₃ both show 0.008 ppm, PM10 is 24.0 µg/m³, PM2.5 is 25.0 µg/m³ and SO₂ records 0.0016 ppm. Because there is a single row per pollutant, the spread (p10‑p90) is zero, so no variability can be assessed from this snapshot.

The dataset’s breadth is limited to one station, which means spatial coverage within Puli Township is minimal; conditions elsewhere in the township may differ from those captured at the 南投縣 - 埔里 location. Although the timestamps are recent, the lack of multiple observations prevents analysis of trends or day‑to‑day changes. Users should keep in mind that these figures represent a single point in time and space, and broader air‑quality patterns in Puli will require additional monitoring locations or more frequent sampling.

Learn more about sources and filtering: About the data.

Trusted references: WHO (Air pollution) · US EPA AirNow · European Environment Agency (Air)

Latest sensor values (bars)

PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).

PM25 25 µg/m³ PM10 24 µg/m³ O3 0.008 ppm NO2 0.008 ppm SO2 0.0016 ppm CO 0.32 ppm
[Advertisement 3]

Data notes

The data shown for Puli Township is based on six valid measurements and was updated within 3 days, with the most recent reading recorded at 2026‑02‑10T23:00:00+00:00. This snapshot reflects conditions at a specific time and place; air quality can differ across neighborhoods and fluctuate throughout the day, so values may not represent the entire city at any given moment.

OpenAQ station rows

StationParameterValueUnitLast updated
南投縣 - 埔里co0.32ppm2026-02-10 23:00 UTC
南投縣 - 埔里no20.008ppm2026-02-10 23:00 UTC
南投縣 - 埔里o30.008ppm2026-02-10 23:00 UTC
南投縣 - 埔里pm1024.0µg/m³2026-02-10 23:00 UTC
南投縣 - 埔里pm2525.0µg/m³2026-02-10 23:00 UTC
南投縣 - 埔里so20.0016ppm2026-02-10 23:00 UTC