Air quality in Rohr im Burgenland, Burgenland, Austria today
Mr. Duck’s Air Quality Score
Good air today for Rohr im Burgenland, Burgenland, Austria
This friendly indicator summarizes the latest city readings. For health guidance, please see: EPA AirNow or WHO.
Air quality today
The air quality in Rohr im Burgenland is currently classified as Good. The primary pollutant identified is PM10. Based on three valid measurements, the PM10 concentration is reported at 23.55 µg/m³. The reported PM10 level of 23.55 µg/m³ falls within the range used for the Good category assessment. No PM2.5 value is available for today.
All reported values are derived from the latest available monitoring points in the area. The measurement count of three ensures a representative sample for the current period. The PM10 value is expressed in micrograms per cubic metre. These data are part of the OpenAQ platform which aggregates publicly available monitoring information. The figures are presented through OpenAQ. This page is informational; for health guidance, use official sources such as EPA AirNow or WHO.
Latest sensor values
PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).
What the data includes
The data for Rohr im Burgenland currently includes measurements of three key pollutants: nitrogen dioxide (NO2), ozone (O3) and particulate matter up to 10 µm (PM10). All three values come from a single monitoring station, so the dataset reflects conditions at one location rather than a city‑wide network. Freshness is high: each pollutant’s most recent reading was recorded on 2026‑02‑10 at 20:00 UTC, and all three rows fall into the “updated within 3 days” category, meaning there are no older or unknown‑age entries.
Because each pollutant is represented by only one row, the statistical spread is limited – the minimum, median and maximum values are identical for every compound. NO2 registers at 6.57 µg/m³, O3 at 29.5 µg/m³ and PM10 at 23.55 µg/m³, so ozone is the highest of the three measured concentrations on the day of observation. The percentiles (10th and 90th) match the single recorded value, confirming that the dataset does not capture variability over time or across different parts of the city. The uniform timestamp across all pollutants also indicates that the measurements were taken simultaneously, providing a consistent snapshot of air quality at that moment.
While the data is recent and internally consistent, the reliance on a single monitoring point means spatial coverage is narrow. Conditions such as traffic emissions, local industry or micro‑climate effects can differ across Rohr im Burgenland, and those variations are not reflected in the current numbers. Users should keep in mind that the presented values describe one specific site at a specific time, and broader city‑wide patterns may require additional monitoring locations.
Learn more about sources and filtering: About the data.
Trusted references: WHO (Air pollution) · US EPA AirNow · European Environment Agency (Air)
Latest sensor values (bars)
PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).
Data notes
The data shown are based on three valid measurements and were updated within 3 days (last update: 2026-02-10T20:00:00+00:00). They reflect the most recent readings available for Rohr im Burgenland, Burgenland, Austria. Please note that air quality can vary by location and time within the city, so this snapshot may not represent conditions everywhere or at all moments.
OpenAQ station rows
| Station | Parameter | Value | Unit | Last updated |
|---|---|---|---|---|
| Rohr im Burgenland | no2 | 6.569999 | µg/m³ | 2026-02-10 20:00 UTC |
| Rohr im Burgenland | o3 | 29.5 | µg/m³ | 2026-02-10 20:00 UTC |
| Rohr im Burgenland | pm10 | 23.55 | µg/m³ | 2026-02-10 20:00 UTC |