Air quality in Stendal, Saxony-Anhalt, Germany today
Mr. Duck’s Air Quality Score
Moderate air today for Stendal, Saxony-Anhalt, Germany
This friendly indicator summarizes the latest city readings. For health guidance, please see: EPA AirNow or WHO.
Air quality today
The air quality in Stendal today is classified as Moderate. The primary pollutant identified is PM2.5 (fine particles). Measurements show a PM2.5 concentration of 17.9024 µg/m³ and a PM10 level of 18.92795 µg/m³, based on four valid observations.
Data is shown via OpenAQ. This page is informational; for health guidance, use official sources such as EPA AirNow or WHO.
Latest sensor values
PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).
What the data includes
The air‑quality feed for Stendal draws on a single monitoring site, Stendal Stadtsee, and currently provides six separate pollutant measurements: carbon monoxide (CO), nitrogen oxide (NO), nitrogen dioxide (NO₂), ozone (O₃), particulate matter ≤ 10 µm (PM₁₀) and particulate matter ≤ 2.5 µm (PM₂.₅). All six rows are present in the dataset, so coverage of the listed pollutants is complete, but it comes from just one location rather than a network of stations.
The timestamps show a mixed picture of data freshness. The most recent updates for NO₂, O₃, PM₁₀ and PM₂.5 were recorded on 2026‑02‑10 at 18:00 UTC, meaning those four pollutants reflect conditions from the last few days. In contrast, the CO value dates back to 2020‑12‑30 02:00 UTC and is flagged as “Old data,” while the NO measurement was last refreshed on 2024‑03‑11 09:00 UTC. Thus, half of the pollutants have very recent entries, whereas the other half rely on older records.
Because each pollutant has only a single reported figure – the minimum, median and maximum are identical – there is no observable spread within this dataset. CO registers at 200.0 µg/m³, NO at 1.54466 µg/m³, NO₂ at 16.2836 µg/m³, O₃ at 35.54715 µg/m³, PM₁₀ at 18.92795 µg/m³ and PM₂.5 at 17.9024 µg/m³. The uniformity of values indicates that the current snapshot does not capture variability over time or across different parts of the city. Consequently, while Stendal’s air‑quality page can show the presence of these six key pollutants, users should be aware that conditions may differ elsewhere in the city and that some of the data points are dated, limiting a full picture of real‑time air quality.
Learn more about sources and filtering: About the data.
Trusted references: WHO (Air pollution) · US EPA AirNow · European Environment Agency (Air)
Latest sensor values (bars)
PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).
Data notes
The dataset for Stendal includes four valid measurements and was refreshed recently, with the latest update recorded on 2026‑02‑10 at 18:00 UTC; it is therefore considered updated within three days. These values represent a snapshot of conditions across the city at that time. Air quality can vary by location and moment within Stendal, so individual experiences may differ from the reported figures.
OpenAQ station rows
| Station | Parameter | Value | Unit | Last updated |
|---|---|---|---|---|
| Stendal Stadtsee | co | 200.0 | µg/m³ | 2020-12-30 02:00 UTC |
| Stendal Stadtsee | no | 1.54466 | µg/m³ | 2024-03-11 09:00 UTC |
| Stendal Stadtsee | no2 | 16.2836 | µg/m³ | 2026-02-10 18:00 UTC |
| Stendal Stadtsee | o3 | 35.54715 | µg/m³ | 2026-02-10 18:00 UTC |
| Stendal Stadtsee | pm10 | 18.92795 | µg/m³ | 2026-02-10 18:00 UTC |
| Stendal Stadtsee | pm25 | 17.9024 | µg/m³ | 2026-02-10 18:00 UTC |