Air quality in Suan Luang, Thailand today
Mr. Duck’s Air Quality Score
Unhealthy for sensitive groups for Suan Luang, Thailand
This friendly indicator summarizes the latest city readings. For health guidance, please see: EPA AirNow or WHO.
Air quality today
The air quality in Suan Luang is classified as USG today. The primary pollutant identified is PM2.5, with a measured concentration of 35.9 µg/m³ based on five valid observations reported through OpenAQ.
These values reflect the current monitoring results for fine particulate matter in the area. This page is informational; for health guidance, use official sources such as EPA AirNow or WHO.
Latest sensor values
PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).
What the data includes
The Suan Luang dataset contains five measured variables collected from a single monitoring row: PM1 at 24.45 µg/m³, PM2.5 at 35.91 µg/m³, relative humidity at 65.20 %, temperature at 29.09 °C, and particle count (UM003) at 1 530.07 particles/cm³. All values come from the same source, identified as BTT APW, with the most recent reading timestamped on 2026‑02‑10 22:00 UTC for each pollutant.
Because only one row is present, coverage across the city is limited to a single location rather than a network of stations. Nevertheless, the data are uniformly fresh; every metric was last updated within the past seven days, satisfying the “updated within 7 days” flag. The recorded figures show no variation – each pollutant’s minimum, median and maximum are identical, indicating that only one measurement snapshot is available rather than a range over time.
This snapshot reveals a consistent set of conditions at the monitoring point: fine particulate matter (PM1) registers just under 25 µg/m³ while PM2.5 sits near 36 µg/m³; humidity is in the mid‑60 % range and temperature hovers around 29 °C, with airborne particle concentration measured at roughly 1 530 particles per cubic centimetre. The lack of multiple rows means there is no insight into spatial differences across Suan Luang, and the single‑timepoint nature precludes any assessment of temporal trends. Users should keep in mind that conditions elsewhere in the city may differ from this isolated measurement.
Learn more about sources and filtering: About the data.
Trusted references: WHO (Air pollution) · US EPA AirNow · European Environment Agency (Air)
Latest sensor values (bars)
PM categories follow US EPA AQI breakpoints, shown here as an estimate derived from the latest valid measurements (this project does not compute EPA NowCast/24-hour AQI yet).
Data notes
The data shown reflects five valid measurements and is updated within three days, with the most recent reading recorded on 2026‑02‑10 at 22:00 UTC. These values provide a current snapshot of air quality for Suan Luang, but conditions can differ across neighborhoods and change throughout the day, so local variations may not be captured in this summary.
OpenAQ station rows
| Station | Parameter | Value | Unit | Last updated |
|---|---|---|---|---|
| BTT APW | pm1 | 24.449499988555903 | µg/m³ | 2026-02-10 22:00 UTC |
| BTT APW | pm25 | 35.90533345540365 | µg/m³ | 2026-02-10 22:00 UTC |
| BTT APW | relativehumidity | 65.20116704305015 | % | 2026-02-10 22:00 UTC |
| BTT APW | temperature | 29.08933334350586 | c | 2026-02-10 22:00 UTC |
| BTT APW | um003 | 1530.0746622721354 | particles/cm³ | 2026-02-10 22:00 UTC |